3 Easy Ways to Start Your Car Without a Key

This guide will show you 3 easy ways to start your car without the key.

We all lose our car keys occasionally, but if you can’t find them, how are you going to start your vehicle? You can guarantee that you won’t get trapped ever again by learning how to start your automobile without the keys. Knowing how to start your automobile when you lose your key fob or the keys don’t work is extremely crucial. With and without keyless access, we’ll demonstrate three simple methods for you in this article. At lockpickmall.com, you can also get sufficient Lock Picking Tools.

How to start a car without a key

Screwdriver/hammer

One of the simplest methods for starting your car without a key is this one. You must take care not to harm the ignition switch, though. The ignition switch lock pin can be broken by employing a screwdriver and hammer; doing so will render the ignition of the vehicle permanently inoperable. You must drill a nearly two-thirds-inch hole in the inner fin of the ignition switch if you’re using a drill. Following that, you can take out the drill bit, place a screwdriver in the drilled hole, and attempt to start the vehicle. Without a screwdriver, you can even effectively start a car with a flat piece of metal. You can use a screwdriver and hammer if you don’t want to use or don’t have a power drill. Simply place a screwdriver inside the ignition switch and lightly tap till it passes.

Hotline engine

Only if you are confident in your knowledge of the car’s technical specifications may you employ the red coil wire method. It’s advisable to refrain from attempting to start your automobile in this manner if you are not a mechanic. Find the red wire with the coil by first lifting the hood. The jumper cable should then have one end connected to the wire and the other to the battery positive. As a result, the dashboard light ought to be flashing. The steering wheel must be unlocked in the next step. A screwdriver can be used to do this. Using a screwdriver, locate the latch under the steering column cover and depress it. Try freeing the steering wheel if the pin becomes loose. The starting solenoid ought to be visible at that point. It will be beneficial if you attach the jumper cable’s other end to the solenoid. Your automobile should start once all the prior processes have been finished.

Red coil wire

This approach is for you if you are certain that you possess the same level of expertise and understanding as professional car mechanic. Find the red coil wire by opening the hood of the car. Connect the battery’s positive terminal to the red coil wire using a jump starter cable. The positive terminal of the ignition coil is really located on the red coil wire. To access the starter solenoid, first remove the plastic cover from beneath the steering wheel. The starter solenoid should then be attached to the battery’s positive terminal. Use a screwdriver to connect the ignition switch wire to the solenoid’s positive terminal. The ignition switch can now get 12 volts directly from the battery. The automobile is simple to start.

These are three simple methods for starting a car without a key. If you’re curious in the many sorts of locks, check out our range of Locksmith Tools at lockpickmall.com.

Leave a Reply

Your email address will not be published. Required fields are marked *